Cladding Quality

Content & images courtesy of TDCA

Let's go!

The standard for cladding specification is BS8605:2014 External Timber Cladding Part 1 – Method of Specifying. Additional standards are detailed at the end of this page. BS8605 details other standards which are acceptable as BS EN 942, 14951, 14519, and 15146 for appearance grading.

The systems used for appearance grading will change from supplier to supplier, each will have its own interpretation of premium, standard and character grades, so it is vital to find a supplier who can supply material with the appearance of which you are happy before you buy. If you can, always ask for pictures showing the grade.

BS1186 is the main recognised standard for timber cladding, but this hasn’t been updated since 1990. Modern practices of manufacture and material approval have surpassed the use of this standard. However, it does still have some relevant information on moisture, sapwood and faults.

Checklist For Your Timber Cladding

When selecting timber for your cladding, the main considerations are detailed here:

Budget

The price of timber can shift dramatically from species to species. Those which are hardier and durable are usually more expensive, whilst those which are less durable will be more budget-friendly. Cost can also be affected by how available the timber species is (regardless of durability), the quality grading of the specific batch of wood and how much processing has been involved in their manufacture (planing, sorting, staining, etc).

Desired Service Life vs Durability

It is hard to reach an accurate prediction on how long timber will last due to the wide range of factors which can affect it. However, in general, the length of service will be worked out by looking at durability. For timber that lasts up to 30 years, you will need wood which is rated as durability class 1 – that can be a tropical hardwood or a modified/treated softwood, depending on the treatment level achieved.

Timber cladding is usually a Use Class 3 application (above ground, exposed), so it is important you select a timber which is suitable for this application – ask your merchant if in doubt. Choosing material with appropriate durability and taking care when detailing the installation to ensure it is free draining and well ventilated will prevent fungal degradation, and therefore draw the maximum life service from your investment.

Reaction to Fire

It is often required under building safety standards to protect timber cladding with a flame retardant. The species, type of treatment, fixing details, profile size and cavity design should all be taken into account when designing timber cladding.

Design detailing

In the UK, timber cladding is installed as a rainscreen fitted over a drained and ventilated cavity, which is ventilated top and bottom. This ensures free drainage and no moisture traps and is one of the most vital steps in your design detailing.

Natural or Coated?

Since timber will naturally weather and become silver-grey when exposed to the weather over time, it is important you decide whether you prefer this look – or if you would like to prevent that happening. In case you decide to slow down the silvering effect, you will need to apply a UV layer of protection, commonly known as a stain. We at Exterior Timber can deliver your cladding with this treatment pre-applied in a factory setting, or we can also deliver your raw timber cladding and tins of stain for you to apply before or after installation.

Timber Maintenance Regimes

If you know that maintenance and repairs are going to be difficult on your building, invest money now into a highly durable, long-lasting timber which will make maintenance much less likely. Even with durable wood, though, it is vital you know how often you should conduct maintenance. All coated cladding will need recoating and repairs are occasionally needed, no matter what species you choose.

Resistance to Impact Damage and Vandalism

A species with low density which is more likely to see damage from impacts should not be used at lower levels of the structure. In these spots, it is easier for the wood to become scraped, dented or vandalised so bear that in mind at the specification stage.

Sustainability certification

There are plenty of certification schemes which certify your timber is from sustainably managed forests, whether you are looking at species grown in the UK or abroad. Look out for FSC certified timber or PEFC accreditations for the peace of mind that your wood is sustainable.

Quality grading of the Timber

The quality grading of different species of timber is generally based on its appearance. Factors such as knot size and frequency, and whether sapwood is included can have a strong effect on the look and durability of your timber cladding.

Sapwood

It is also important to note that sapwood will affect the quality of your timber. Sapwood is much more prone to rot and insect attack, making it naturally less durable, and any durability ratings of a species refer to the stronger heartwood, not the sapwood. If you are using timber for cladding, it is better to stick to heartwood. However, where sapwood is still detectable, keep it away from the external, visible side of the cladding where it will be more at risk of damage. The timber should also preferably be pre-treated or modified if sapwood is present, improving the durability of the wood despite the weaker component.

Supplier Support Services

Another factor to consider when purchasing timber that is often overlooked is the support from the supplier. What range of support services are available to you before, during and after the installation of your cladding? Critical support services include the supply of samples, technical expertise and guidance, advice on handling and quality dispute resolution. To be sure you are working with a reputable supplier, look for the TDCA CladMark, and accreditation that means the company’s capabilities and services have been assessed independently and meet high standards.

When choosing timber cladding, look for wood that has been manufactured using processors which operate under a Factory Production Control System, accredited by a reputable third party.

Quality refers to two things in timber cladding production: the factory processes and the material used. By looking for accreditations like the TDCA CladMark, you can be sure that both aspects are being checked and standards across production are adhered to.

Standards relating to cladding specification

BS 8605

External Timber Cladding Part 1: Method of specifying.

This standard is fairly new in comparison to others here, being released in late 2014. It looks at all aspects controllable by the timber manufacturer and includes vital information for anyone specifying or installing timber cladding.

BS EN 14915

Timber panelling and cladding markings and specifications

In this standard, the full data set relating to CE labelling and marking is outlined, following the EU Construction Product Regulations that were implemented in July 2013.

 

BS 1186-3

Timber joinery workmanship

Part 3: this standard looks into the requirements for wood trim as well as its fixings.

BS EN 350:2016

Timber durability

In this standard, you will learn more about how wood is tested and classified based on its durability to biological matter.

BS8417

Wood preservation – Code of practice

Provides treatment specifications for different preservative types for different end uses.

BS EN 335

Durability of wood in terms of applications

Outlining the five Use Classes – such as Use 3, external timber in above ground contact, which we regularly mention – based on durability and the varying risk from biological matter. Use 3 has a medium risk of issues arising from biological matter.

BS EN 1310

Sawn and Round Wood

This standard outlines how we measure the features of wood.